• My Cart 0
    Cart Total : ( item(s) )

    No products in the cart.

  • Hot Melt Butyl Sealant for Insulating Glass
  • Hot Melt Butyl Sealant for Insulating Glass
  • Hot Melt Butyl Sealant for Insulating Glass
  • Hot Melt Butyl Sealant for Insulating Glass
  • Hot Melt Butyl Sealant for Insulating Glass

Hot Melt Butyl Sealant for Insulating Glass

stars, based on ( 0 ) reviews
£0.79 barrel
100000 items available
Contact Us

Hot Melt Butyl Sealant for Insulating Glass

Hot Melt Butyl Sealant for Insulating Glass is one part polyisobutylene PIB based material, totally solvent free especially formulated for use as the primary seal in double sealed units. PIB allows for minimum water vapor and gas permeation.


The P.I.B butyl sealant has excellent adhesion properties to glass and metal spacer systems and can be used together with conventional secondary sealants.


It work for the edge of spacer frame by PIB machine, the sealant can be removed from glass without any pollution on glass.


Features:


1.Very low moisture vapor transmission rates (MVTR) and gas permeability rates.
2. Properly constructed dual-seal units incorporating the PIB butyl sealant will retain argon insulating gas and maintain a dry interior unit airspace for decades. 
3.PIB butyl sealant able to be used with most commercially available silicone, polysulphide or butyl hot melt insulating glass secondary sealants.
4.Without any smell


Typical Properties:

Test itemStandard
ColorBlack
Solids content (%)100%
Penetration degree25°C36
130°C315
Density (g/ cm3)1.40
Shearing strength0.14mpa
Hot weightlessness0.1%
Ultraviolet radiation performanceNo fog
Temperature resistance-40degrees Celsius -130 degrees Celsius
Extrusion temperature130 degrees Celsius -145 degrees Celsius
Hardness Shore A, after 24 hours>45
Storage time24 months


Packing:

8.0kg per pc, 4 pcs per carton.


Storage:
24 months store in original unopened packaging at temeprature between 10 to 30 Celsius degree.

Use:

The surfaces to be bonded must be dry, clean and free from dust and grease. Glass surfaces should be
thoroughly cleaned by hand or machine with non-i lm forming, low residue etergent and rinsed thoroughly with clean hot water, the P.I.B butyl sealantshall be applied at a temperature between 140 to 150 degree Celsius with butyl hot melt extruder machine, please check with extruder equipment manufacture for optimum equipment settings.



Note:
It is recommended that glazing materials be tested for compatibility.
Contact with any solvent, oil, or plasticizer-containing glazing materials should be avoided.

Workshop and warehouse

Our Services

1. We can according you needs to design the logo.
2. We have professional engineers to solve the problem.
3. Prompt reply answer within 24 hours.
4. Engineer available to service machinery overseas.
5. Welcome to visit our factory, and we provide technical training for you

FAQ

1.Q:Could we send a free sample for reference?

A:Yes, of course.


2.Q:How long is the quality guarantee storage period?

A:1 year


3.Q:What about the price?

A:We promise the price we offer is the lowest if same application,only to enlarge the market share.


4.Q:What is the lead time?

A:30-35days after sample confirmation


5.Q:How to solve the quality problems after sales?

A:Take photos of the problems and send to us.

After we confirm the problems,within three days,we will make a satisfied solution for you.

More information please contact us. It's our pleasure to solve the question for you.

Contact

Contact:Dilys Lv
Telephone number: 86-15154118497
WhatsApp:86-15154118497
Wechat:Adilys510
Web:www.rongqimachinery.com

If you have any questions , please contact us at any time.