• My Cart 0
    Cart Total : ( item(s) )

    No products in the cart.

Product introduction

Problems and Solution with Insulating Glass Coating Machine

Problems and Solution with Insulating Glass Coating Machine

  • Thursday, 27 February 2020
  • 5
  • 2146
  • 0

In terms of function, the insulating glass coating machine is very single. Focus on the insulating glass coating, but the insulating glass coating machine may encounter a variety of problems in the glue process, today we are specifically aimed at the insulating glass coating machine glue process, the problem is not full glue .


In fact, regarding the problem of insufficient full glue of the insulating glass coating machine, there may be mainly the following reasons:

First, the coating speed causes the glue of the insulating glass coating machine not full:

Insulating glass glue machine as equipment, many problems are common. Adjusting the glue speed is an indispensable choice for many small and medium glass processing enterprises. In order to speed up their production rhythm and catch up with their own schedules, the glue speed of the insulating glass glue machine will be adjusted faster.

With the speed being adjusted, many glue problems will inevitably arise. The glue application speed was adjusted too fast, which resulted in that the colloid had not yet reached the qualified standard, and the machine head had moved to the next position for glue application. Therefore, the problem will occur that the glue is not full during the glue application process of the insulating glass coating machine .

Solution for too fast speed and not full glue of the insulating glass coating machine:

If we need to speed up the glue application and adjust the moving parameters of the coating machine, then we should also set the glue supply system accordingly. For example, we need to increase the glue supply pressure and increase the glue application. The speed of the melter to match the increase in the moving speed of the object. If we simply increase the moving speed of the glue machine without adjusting the pressure, it is very likely that the glue will not be full.

2. Insufficient supply pressure leads to insufficient filling of the insulating glass coating machine:


We know that in the process of insulating glass glue machine, the two-component silicone glue is extruded by pressure to glue. If the pressure is too small, it will cause too little glue to be filled during the glue application process.

At this time, we need to increase the supply pressure and increase the dispensing speed of the glue machine to match the increase of the object's moving speed. If we do not adjust the pressure, it is very likely that the glue will not be full. At this time, we only need to adjust the pressure of the rubber supply to perfectly solve this problem.

Today, we specially interpreted the problem of insufficient filling of the insulating glass glue machine, hoping to help everyone.

5 users like this.

Leave a Reply