• My Cart 0
    Cart Total : ( item(s) )

    No products in the cart.

Product introduction

Precautions for using a fully automatic glass cutter

Precautions for using a fully automatic glass cutter

  • Thursday, 27 February 2020
  • 1
  • 1967
  • 0


I. It is forbidden to plug and unplug the parallel cables connected to the computer when charged. It is forbidden to plug and unplug any hardware equipment such as the control card when charged. The computer or automatic glass cutting machine casing shall be grounded to ensure safety and prevent interference. Turn off the power and unplug it when not in use for a long time.

2. Turn on the power of the full-automatic glass cutting machine, perform the zero return operation, and then try various functions manually, including cutting and cutting oil, whether the air pressure is normal, and the wear is not worn.

3. when loading the map, make sure that the loaded map is within the cut range.

4.the full-automatic glass cutting machine should check the appearance of the cut glass before cutting can not have white spots and scratches.

5. Click to start cutting to make sure that the glass cutting machine y faces no one around it, and after performing the cutting, perform other non-emergency stop operations.

1 users like this.

Leave a Reply